Sharp UP-600 Service Manual page 98

(19) Install four paper side guide plates on the bottom
of paper guide (U).
Paper guide (U)
Paper side
guide plates
(20) Insert the washer and spool spring into the spool
gear assembly and apply Moly LG-S No. 1.
Note: 1. The spool gear assembly refers to the spool
gear with inserted spool spring bush.
2. When installing, the hook of the spool
spring should face forward, and the spring
should be turned counterclockwise.
(21) Apply Moly LG-S No. 1 to the outer circumference
of the spool spring and install the winder pulley.
(22) Apply Moly LG-S No. 1 to the pivot of the spool holder
assembly. Fit the spool gear assembly with the mounted
winder pulley in and fasten it with E-ring (E3).
Spool gear
assembly
Washer
Spool holder assembly
Pivot
(Apply Moly LG-S No. 1 )
Apply Moly LG-S No. 1
E-ring
Winder pulley
Spool spring
(23) Apply ORELUBE G-1/3 to the pivot of the main
frame assembly. Mount the carriage drive gear and
carriage drive pulley and fasten with E-ring (E2.5).
Carriage drive gear
Main frame
assembly
(Apply ORELUBE G-1/3)
14
E-ring
Carriage drive pulley
Pivot