HP 200 Service Manual page 108

9 Remove the screw inside the ferrite ring.
Torx-15
11 Move the trailing cable guide towards the rear of the plotter, rotate it to clear the arm of the
cartridge adjustment cam on the cartridge carriage, and lift the trailing cable guide clear of
the plotter.
6 44 Removal and Replacement
10 Slightly lift up the guide and carefully
remove the ferrite ring.
C A U T I O N
Be careful not to scrape the cartridge carriage
PCA with the trailing cable guide if you are
sliding the guide under the trailing cable.
C3187 90000