HP 200 Service Manual page 123

11 Lift the service station sled clear of the
service station housing and the plotter.
14 Remove the screw and washer that
secure the wiper rod and rocker to the
left sideplate, and lift the rod and rocker
clear of the plotter.
Torx-15
C3187 90000
12 Remove any wet ink from the wiper in
the service station housing.
13 Remove the wiper from the top of the
wiper rod by pulling the wiper up.
Wiper
15 Remove the three screws that attach the
service station housing to the left
sideplate.
wiper rod
wiper rocker
16 Lift the service station housing slightly
up and pull it clear of the left sideplate.
Torx-20
Removal and Replacement 6 59