Table of Contents
Advertisement
Message
UNABLE TO
FOCUS
LOW LIGHT -
UNABLE TO
FOCUS
(camera shake
warning)
ERROR SAVING
IMAGE
Chapter 7: Troubleshooting and Support
Possible cause
The camera
cannot find focus
in
MACRO
mode, possibly
due low contrast.
The scene is too
dark and the
camera cannot
focus.
The light is low
and the image is
likely to be
blurry due to the
long exposure
required.
Memory card
was half-locked
or was removed
before the
camera finished
writing to the
card.
Solution
Focus Lock
Use
(page 25). Point at a
part of the scene that is
brighter.
Make sure the camera is
within the range of
MACRO
(page 36).
Add an external light
source.
Focus Lock
Use
(page 25). Point at a
part of the scene that is
brighter.
Make sure the Focus
Assist light is set to
(page 85).
Use the flash (page 32), or
use a tripod.
Check to see if the tab on
the edge of the memory
card is fully in the
unlocked position.
Always wait until the
Power/Memory light
returns to green before
removing the card from
the camera.
focus
Auto
107
Hide quick links:
Advertisement
Table of Contents
