Setting The Date And Time; Adjusting The Diopter Control - HP PhotoSmart 945 User Manual

Setting the Date and Time

The camera has a clock that records the date and time at which
you take each picture. This information does not appear in the
image itself, but is recorded in the image properties, which you
can see when viewing the image in the
(page 67), in the
computer. The first time you turn the camera on, the following
screen appears after you choose the language.
1
Adjust the value of the highlighted
selection using the
2
Press the
other selections.
3
Repeat steps 1 and 2 until the
correct date, time, and date/time
format are set.
NOTE
mm=month, dd=day, and yyyy=year
4
Press the OK
The Image Display then turns off.
NOTE
If you need to go back and change this setting later,
you can do this in the
the Setup Menu

Adjusting the Diopter Control

The rubber eye piece on the viewfinder is a diopter control that
allows you to adjust the focus in the microdisplay. Put your eye
up to the viewfinder, and then turn the diopter control until the
information overlays (such as the number of pictures
remaining, Compression
focus on the microdisplay. The diopter control has NO effect on
the actual picture you take or video clip you record.
Chapter 1: Getting Started
Playback menu screen (page 61), or on your
buttons to move to the
button when the proper values are entered.
Setup
on page 83.
setting, and
Image Info
buttons.
menu. See
Resolution
screen
Chapter 6: Using
setting) are in
19