HP PhotoSmart 945 User Manual page 99

Problem
The camera
does not take
a picture
when I press
the Shutter
button.
Chapter 7: Troubleshooting and Support
Possible cause
You did not
press the
Shutter button
hard enough.
The memory
card is not
installed.
The memory
card is full.
The memory
card is locked.
The flash is
recharging.
The camera is
set to
MACRO
focus and
cannot take a
picture until it
finds focus.
The camera is
still saving the
last picture
you took.
Solution
Press the Shutter
way down.
Install the memory card.
Unload images from the camera
to your computer, then delete all
images on the memory card. Or
replace the card with a new one.
Switch the locking tab on the
memory card to the unlocked
position.
Wait until the flash has recharged
before taking another picture.
Re-focus the camera (try using
Focus Lock, page 26).
Make sure the subject of the
picture is within the Macro
(close-up) range (page 36).
Wait a few seconds for the
camera to finish processing the
last image before taking another
picture.
button all the
99