Canopy T1/E1 Multiplexer
2. Type in the upgrade key that your Canopy distributor provided for this unit, then
press Enter.
3. Click Done.
RESULT: If the upgrade succeeded, then the Key accepted window appears
(see
Figure
If the upgrade failed, then the Failed: Invalid key entry window appears (see
Figure
NOTE: At any later date, you can confirm the number of enabled ports as follows.
4. From the main menu, select Config→Canopy T1/E1 Mux.
RESULT: The Canopy T1/E1 Mux Configuration window opens, as shown in
Figure
Issue 1
26).
27).
Figure 26: Key accepted window
Figure 27: Invalid key entry window
28.
T1/E1 Multiplexer Release 3.1
June 2004
57 of 69
Page