Canopy T1/E1 Multiplexer Reference Information; Cli Commands To Get Status Information - Motorola Canopy T1 User Manual

Canopy T1/E1 Multiplexer
4 CANOPY T1/E1 MULTIPLEXER REFERENCE
INFORMATION
4.1 CLI COMMANDS TO GET STATUS INFORMATION
Desired Action
Get Canopy-side
Ethernet auto-
negotiation
Get LAN-side
Ethernet auto-
negotiation
Get line type
Issue 1
Syntax, Response, and Description
Enter get canopy port auto negotiation
The system responds
Canopy port auto-negotiation is: [on/off]
Gets the auto-negotiation mode for the Canopy BH Ethernet port. If
auto negotiation is set to OFF, the port will be forced to 100 Mbps Full
Duplex.
Enter get lan port auto negotiation
The system responds
LAN port auto-negotiation is: [on/off]
Get the auto-negotiation mode for the customer LAN Ethernet port. If
auto negotiation is set to OFF, the port will be forced to 100 Mbps Full
Duplex.
Enter get type
The system responds
Line type [T1/E1]
Gets the line type, either T1 or E1. All four ports have the same line
type.
T1/E1 Multiplexer Release 3.1
June 2004
63 of 69
Page