Adf & Document Cover Assy (Document Cover) (For Models With Adf), Document Cover (For Models Without Adf) - Brother MFC990CW Service Manual

6.1.3 ADF & Document Cover ASSY (Document Cover) (for models with ADF),
Document Cover (for models without ADF)
Models with ADF
(1) Turn the ADF & document cover ASSY upright and slightly lift it up.
(2) Insert the tip of a flat screwdriver into the slit provided at the front of hinge R, push the
latch inside the scanner cover to the front, and release hinge R from the scanner cover.
(3) Just as in step (2), release hinge L and then pull the ADF & document cover ASSY up and
off the scanner cover.
(4) Slightly turn hinges R and L and remove them from the ADF & document cover ASSY.
ADF & document cover ASSY
Document front
sensor harness
Document rear
sensor harness
ADF motor harness
Grounding wire
Hinge L
Assembling Note: When mounting the ADF & document cover ASSY on the scanner
cover, put a magazine or a stack of paper about one inch (2 to 3 cm) thick between them to
secure room for looseness of harnesses. Do not use the one that may scratch or contaminate
the scanner glass.
Hinge R
CIS motor harness
6-17
Hinge R
Latch inside the
scanner cover
Scanner cover
(scanner unit)
(6_16_ADF)
Confidential