Setting Of Country For Cordless Handset - Brother MFC990CW Service Manual

(3) Press the
The 10-digit base ID code appears on the handset's LCD as shown below.
Base Unit
ID = XXXXXXXXXX
Current BASE=Y
NOTE: Y indicates the base unit number selected in step (1) above.
(4) To return to the standby state, press the C key twice.
NOTE: To display the ID code of another base unit, repeat steps (1) to (3) after returning to the
standby state.

9.2.3.5 Setting of Country for Cordless Handset

Function
This function is used to specify the destination country for the cordless handset on the LCD
screen called up automatically when the user loads a battery to the cordless handset.
Operating Procedure
(1) On the cordless handset, press the Menu/OK, *, 0, 7, and 4 keys in this order in the
standby state.
The "Set Country" appears on the handset's LCD.
(2) Remove the battery from the cordless handset.
When the user loads a battery to the cordless handset at the next time, the cordless handset
will start up in the country selection mode displaying the "Set Country." The default
country is U.K.
or key to display "TEST RFPI" and press the Menu/OK key.
9-81 Confidential