Brother MFC990CW Service Manual page 343

(3) Press the or
The "Set country / 1. Yes 2. No" appears on the handset's LCD.
(4) Press the 1 key.
The cordless handset beeps and displays "Accepted," indicating that the new country
setting has been saved.
Pressing the 2 key returns the cordless handset to step (1) state without saving the new
country setting.
--------------------------------------------- USA models ----------------------------------------------------
Setting up the cordless handset so that it starts up in the country selection mode when the end
user loads a battery to the cordless handset
(1) Press the Menu/OK, *, #, 4, 4, 1 and # keys in this order.
The "PP E2P EDIT / Addr= 00 / Data=****" appears on the LCD.
(****: Current country code)
(2) Press the key.
The cordless handset becomes ready to accept the Addr (address) input.
(3) Press the key to change the Addr value to "01."
(4) Press the key.
The cordless handset becomes ready to accept the Data input.
(5) Press the or
(6) Press the Menu/OK key and remove the battery from the cordless handset.
When the end user loads a battery to the cordless handset at the next time, the cordless
handset shows the country selection window "Set Country."
key to choose the desired country. Then press the Menu/OK key.
key to set the Data value to "0000."
7-45 Confidential