7 ] Adjust Margins In Borderless Printing (Function Code 66) - Brother MFC990CW Service Manual

[ 7 ] Adjust margins in borderless printing (Function code 66)

Before starting the operation below, be sure to set A4-size paper in the paper tray for printing
check patterns.
(1) On the PC, run "filedg32.exe" in the folder created in
The Filedrgs window appears as shown below.
Left and right margin adjustment
(2) Drag and drop the "media.prn" onto the Brother Maintenance USB Printer driver icon in
the Filedrgs window shown above.
The machine displays the "RECEIVING DATA" on the LCD and prints out the "MEDIA
CHECK" pattern (see
right margins.
(3) Measure the left and right margins on the printed pattern.
The upper row is printed in 600 dpi, and the lower row, in 1200 dpi.
(Example) 600 dpi
If both of the left and right margins are within the range from 0.9 to 1.1 mm, no adjustment
is required. If not, go to step (4).
(4) If either of the left and right margins is out of the specified range, press the 6 key twice and
the * key on the machine. (For models without numerical keypad, enter 6, 6, and * using
the , and OK keys.)
NOTE: In models with touch panel, to display the numerical, * and # keys, it is necessary
to switch the software keypad between the numerical and function keypads by pressing the
Scan and Copy keys simultaneously.
The "LEFT: 10" appears on the LCD.
page 7-25
Left: 0.8 mm, Right: 1.1 mm
1200 dpi Left: 0.9 mm, Right: 1.2 mm
Section
for a sample printout). This is for checking the left and
7-22
7.1.1.
Confidential