Restore Machine Information (Maintenance Mode 46); Adjust The Touch Panel (Maintenance Mode 78); Acquire Black And White Level Data (Maintenance Mode 55); Adjustment Of Ruled Lines (Maintenance Mode 65) - Brother DCP-J552DW Service Manual

1.8

Restore machine information (Maintenance mode 46)

Refer to Restore on
restore the device information that was backed up.
If Restore is successful,
If the device information could not be restored from the external memory, replace the ink absorber
box and flushing box and reset the purge and flushing counts in
1.9

Adjust the Touch Panel (Maintenance mode 78)

Refer to Chapter 5 "1.3.31 Adjust the Touch Panel (Maintenance mode 78)"
execution.

1.10 Acquire Black and White Level Data (Maintenance mode 55)

Refer to Chapter 5 "1.3.17 Acquisition of White/Black Level Data and CIS Scanner Area Setting
(Maintenance mode 55)"

1.11 Adjustment of Ruled Lines (Maintenance mode 65)

Refer to Chapter 5 "1.3.23 Adjustment of the Vertical Print Lines/Ruled Lines (Maintenance mode
65)" for details on how to adjust vertical print lines.

1.12 Update the Paper Feeding Correction Values (Maintenance mode 58)

Refer to Chapter 5 "1.3.19 Updating of Paper Feeding Correction Value (Maintenance mode 58)"
details on the execution.

1.13 Margin Adjustment in Borderless Printing (Maintenance Mode 66)

Refer to Chapter 5 "1.3.24 Margin Adjustment in Borderless Printing (Maintenance mode 66)"
details on the execution.

1.14 Reset Purge and Flushing Counts (Maintenance mode 80)

If the device information could not be restored from the external memory in "1.7 Restore machine
information", replace the ink absorber box and flushing box and reset the purge and flushing counts
by following the steps below.
(1) Switch the machine to the maintenance mode.
(2) Press the [8] and [0] keys in this order.
(3) Press the [ ] key several times until the purge (or flushing count) appears on the LCD.
(4) Press the [2]  [7]  [8]  [3] keys in this order to reset the purge (or flushing) count.
(5) When the count is reset, the machine automatically returns to the initial stage of the
maintenance mode.
When the purge or flushing count approaches 10,750 or Black: 394,864,341 Color: 476,421,189
respectively, the "MACHINE ERROR 46" appears and further purge or flushing operations are
prohibited. Replace the ink absorber box and flushing box, and then reset their counts using the
procedure above.
Chapter 5 "1.3.13 Backup of Machine Information (Maintenance mode 46)"
Section 1.9 to Section 1.14
for details on the execution.
is not necessary.
Section
4-7
1.14.
for details on the
Confidential
to
for
for