Customize Code Destinations (Maintenance Mode 74) - Brother DCP-J552DW Service Manual

1.3.27 Customize Code Destinations (Maintenance mode 74)

<Function>
This procedure customizes the machine according to settings of the language, functions, and worker
switches.
<Operating Procedure>
(1) Press the [7] and [4] keys in this order in the initial stage of the maintenance mode.
The machine displays "Select 74?" on the LCD.
(2) Press the [Mono Start] key.
The machine displays current settings on the LCD.
(3) Enter the desired customizing code.
(4) Press the [Mono Start] key.
This saves the new setting and returns the machine to the initial stage of the maintenance mode.
If the destination code is changed, "PLS UPDATE PROG" appears on the LCD. Load the latest
firmware (refer to
(5) Pressing the [Stop] key during the above procedure returns the machine to the initial stage of
the maintenance mode without saving the customizing code.
Note If no keys are pressed for at least one minute with any display state, the machine automatically
returns to the initial stage of the maintenance mode.
■ EEPROM customizing codes list
DCP-J552DW
DCP-J752DW
MFC-J285DW
MFC-J450DW
MFC-J470DW
MFC-J475DW
MFC-J650DW
MFC-J870DW
MFC-J875DW
Chapter 4, Section
US Canada
- -
- -
0001 0002
0201 0202
0001 0002
0101 0102
0001 0002
0001 0002
0101 0102
1.3).
Germany/Austria
0004
0104
-
-
0003
-
0003
0003
-
5-56
UK/Ireland
0004
0104
-
-
0004
-
0004
0004
-
Confidential