■ Error Code 82
Disc Jam / Paper Jam
Recording paper jam.
The paper width sensor could not detect the leading edge of recording papers.
<User Check>
- Remove the jammed recording paper.
- Check if the recording paper used is according to specifications.
- Check if dark recording paper is not used.
- Clean the platen.
- Check if the paper tray is loaded correctly into the machine.
- Check if the jam clear cover is properly closed.
- Clean the paper pull-in roller.
Step
1
Foreign materials in the recording
paper feeding path
2
Paper feeding path parts out of
place
3
Paper feed roller stained
4
Paper feed motor harness
connection failure
5
Paper pull-in roller worn out
Paper feed roller defective
6
Paper feed motor defective
7
Paper width sensor defective
8
Main PCB defective
Cause
Remove foreign materials.
Reattach the paper feeding path parts.
Clean the paper feed roller.
Reconnect the paper feed motor harness.
Replace the paper pull-in roller.
Replace the engine unit.
Replace the carriage PCB ASSY.
Replace the main PCB ASSY.
2-41
LCD
Solution
Confidential