Ink Absorber Box And Ink Absorber Felt (For The Ink Refill Assy) - Brother DCP-J552DW Service Manual

9.17 Ink Absorber Box and Ink Absorber Felt (for the ink refill ASSY)

Note Do not remove the ink absorber box unless it needs to be replaced.
•
(1) Pull out the main drain tube and air vent tube from the ink absorber box.
Note Pinch the end of the main drain tube with a clip in order to prevent drained ink from
•
leaking and the machine from getting stained with leaked ink.
• Do not place a pulled out tube on top of the main PCB. If the PCB gets stained with ink,
wipe it off with a clean, dry cloth.
(2) Remove the ink absorber box from the lower cover and install the new one immediately.
Note When replacing the tube with a new one, pull the main drain tube from the joint at the back
•
of the maintenance unit and immediately insert and connect a new tube into the joint and
ink absorber box.
If the ink absorber box and surrounding parts gets stained with ink, wipe it off with a waste
•
cloth.
Main drain tube
Air vent tube
Maintenance unit
(3) Take the ink absorber felt (for the ink refill ASSY) out of the lower cover.
View from the right
ASF drive ASSY
Ink absorber box
Ink absorber felt
(for the ink refill ASSY)
3-73
Do not connect the main
drain tube at an angle.
Connect it firmly all the
way inside.
Lower cover
(3_100)
Confidential