Chapter 4 Adjustments And Updating Of Settings, Required After Parts Replacement; If You Replace The Main Pcb Assy - Brother DCP-J552DW Service Manual

CHAPTER 4 ADJUSTMENTS AND UPDATING OF SETTINGS,
REQUIRED AFTER PARTS REPLACEMENT
1

IF YOU REPLACE THE MAIN PCB ASSY

<Operations>
1.1 Customize Destinations (Maintenance mode 74)
1.2 Automatically Set the CIS Type (Maintenance mode 59)
1.3 Install the Firmware (Maintenance mode 28)
1.4 EEPROM Parameter Initialization (Maintenance mode 01)
1.5 Restore Head Calibration Data (Maintenance mode 68)
1.6 Set the Serial Number (Maintenance mode 80)
1.7 Update the head property data (Maintenance mode 68)
1.8 Restore machine information (Maintenance mode 46)
1.9 Adjust the Touch Panel (Maintenance mode 78)
1.10 Acquire Black and White Level Data (Maintenance mode 55)
1.11 Adjustment of Ruled Lines (Maintenance mode 65)
1.12 Update the Paper Feeding Correction Values (Maintenance mode 58)
1.13 Margin Adjustment in Borderless Printing (Maintenance Mode 66)
1.14 Reset Purge and Flushing Counts (Maintenance mode 80)
1.15 Creating of Head Calibration Data and Writing it into Flash ROM (Maintenance mode 02)
1.16 Check Scanning and Printing
<Requirements>
(1) USB flash memory or SD card: 1 piece
(2) USB cable: 1 piece
(3) Create a temporary folder in the PC's C drive (Windows
(4) Service setting tool (brusbsn.zip)
Make a copy of the Service setting tool in the temporary folder in the C drive. Decompress the
file and execute "brusbn.exe" by double-clicking on it.
(5) Download utility (FILEDG32.EXE)
Make a copy of the download utility in the temporary folder in the C drive.
(6) Maintenance driver (MaintenanceDriver.zip)
Make a copy of the maintenance driver in the temporary folder in the C drive. Extract the
copied file and install it. Refer to
PRINTER DRIVER"
(7) Firmware
LZXXXX_$.pjl (For installing firmware using a PC with external memory)
LZXXXX_$.upd (For installing firmware using a PC)
(8) Data files of print patterns
(9) Stylus for touch panel
"APPENDIX 3. INSTALLING THE MAINTENANCE
for details on the installation.
4-1
®
XP or later).
Confidential