Recording Paper Feeding At An Angle; Recording Paper Is Wrinkling - Brother DCP-J552DW Service Manual

4.2.4

Recording paper feeding at an angle

<User Check>
- Check if the recording paper is loaded correctly in the paper tray.
- Adjust the paper tray guide to match the recording paper size.
- Check if the recording paper's thickness is within specifications.
- Check if too much recording paper is loaded in the paper tray.
- Clean the paper pull-in roller.
Step
1 Paper pull-in roller not mounted
in place
2 Bank ASSY out of place
3 Paper feeding path parts out of
place
4 Main PCB defective
4.2.5

Recording paper is wrinkling

<User Check>
- Check if the recording paper is loaded correctly in the paper tray.
- Try reversing the recording paper in each paper tray, or rotating direction of the paper for 180
degrees.
- Adjust the paper guide to match the recording paper size.
- Check if the recording paper's thickness is within specifications.
- Check if the recording paper is not damp.
Step
1 Feeding path parts are out of place Reattach the feeding path parts.
Cause
Reattach the paper pull-in roller.
Reattach the bank ASSY.
Set the paper feeding path parts into place.
Replace the main PCB ASSY.
Cause
2-54
Solution
Solution
Confidential