NEC N8800-149F User Manual page 104

4-24 System Configuration
Console Redirection
Select "Console Redirection" on the Server menu and press Enter to display the following screen.
See the table below for setup options on the screen.
Option
Com Port Address
Baud Rate*
Console Type*
Flow Control*
Console Connection
Continue C.R. after
POST
Parameter
[Disabled]
Serial Port1
Serial Port2
9600
[19.2K]
38.4K
57.6K
115.2K
VT100
VT100, 8bit
PC-ANSI, 7bit
[PC-ANSI]
VT100+
VT-UTF8
None
XON/XOFF
[CTS/RTS]
[Direct]
Via modem
[Off]
On
Description
Select a serial port.
Select a port rate used for the interface with a
hardware console to be connected.
Select a console type.
Select a flow control method.
Select a connector.
Specify whether or not to continue Console
Redirection after OS is loaded.
[ ]: factory default