Evaluate Start And Stop Of Cpu Modules - NEC N8800-149F User Manual

3-12 ESX Operation and Configuration

Evaluate Start and Stop of CPU Modules

This section describes how to confirm the continuous system operation after stopping one of the
CPU modules.
1.
Confirm that the CPU modules are duplicated.
To check if the CPU modules are duplicated, see the status LEDs of the CPU modules.
2
[Indications of status LEDs when CPU modules are duplicated]
1
2
3
2.
Use the ftsmaint command to stop the operation of the CPU module to be removed.
To stop the CPU Module 0, execute the following command.
# cd /opt/ft/bin
# ./ftsmaint bringdown 0 (*)
*As for the CPU module to be stopped, select [CPU Module(ID:0)] to stop CPU
module 0,select [CPU Module(ID:1)] to stop CPU module 1.
1
LED
PRIMARY LED
DISK ACCESS LED
LED
System FT LED
Secondary
(Operating)
Green
Green
System
Green
3
Primary
(Operating)
-
Green