NEC N8800-149F User Manual page 105

CRUx BMC LAN Configuration Submenu
Select "CRUx BMC LAN Configuration" on the Server menu and press Enter to display the
following screen.
See the table below for setup options on the screen.
Option
LAN Connection
Type
IP Address
Subnet Mask
Default Gateway
DHCP
Web Interface
HTTP
HTTP Port Number
HTTPS
HTTPS Port
Parameter
[Auto Negotiation]
100Mbps Full Duplex
100Mbps Half Duplex
10Mbps Full Duplex
10Mbps Half Duplex
[192.168.001.001]
[255.255.255.000]
[000.000.000.000]
[Disabled]
Enabled

[Disabled]
Enabled
[80]
[Disabled]
Enabled
[443]
System Configuration 4-25
Description
Set the connection type of the Management
LAN.
Set the IP address for the Management LAN.
Set the subnet mask for the Management LAN.
Set the gateway for the Management LAN.
Set "Enabled" to automatically acquire an IP
address from the DHCP server. Set "Disabled"
when you specify the IP address.

Set "Enabled" if you use communication via
HTTP, a web interface.
Set the TCP port number for the Management
LAN to communicate via HTTP.
Set "Enabled" if you use communication via
HTTPS, a web interface.
Set the TPC port number for the Management