Automatic Answer - Toshiba PERCEPTION 4000 User Manual

Proprietary digital telephone
Hide thumbs Also See for PERCEPTION 4000:
Table of Contents

Advertisement

PERCEPTION 4000
To Activate Automatic Answer:
1. Press the Automatic Answer
(AUTO) access key.
To Cancel Automatic Answer:
1. Press the AUTO key.
4-8
NOTES:
1. Up to 24 digits can be programmed on each ADL key. Available digits
include 0 ~ 9 ,
, and
*
tone, pauses, and the end of dialing. Enter
a pause of n length (e.g.,
16-second pause); and # to signify the end of dialing.
2. The system does not check the validity of the digits that are
programmed onto an ADL key. If a key has been incorrectly
programmed, you will receive reorder tone when attempting to place
a call via the key.
3. If there is no line selection programmed into the Autodial sequence
associated with the pressed ADL key, a line will be automatically
selected based on your telephone's line preference type. If you
manually select a line, this will override any line that is programmed
onto an ADL key.
4. An Autodial key can be used when your telephone is either idle or
holding a call on "soft hold." When your telephone is in a talking
state, pressing an ADL key will be ignored by the system.

AUTOMATIC ANSWER

By activating the Automatic Answer feature, you can answer internal or
intercom calls through the telephone speaker, without having to press a
line appearance key or activate the telephone's speaker and
microphone. Automatic Answer is activated through the use of a
programmed Automatic Answer access key and applies to your
telephone's prime line, as well as to any intercom lines on your
telephone. If your telephone has a designated ACD agent line, Automatic
Answer will also apply to any internal or external calls to that line.
The AUTO LED will light solid green and will remain lit until Automatic
Answer is canceled.
Any internal calls to your telephone's prime line or intercom line, or any
internal/external calls to your telephone's ACD agent line, will cause a
burst of tone ring and will automatically activate the telephone's speaker
and microphone. You can continue the conversation by using the
speaker and microphone or by picking up the telephone handset.
The AUTO LED will go out.
FEATURE OPERATION
#. Special functions are available to signify dial
* *
6 = a 6-second pause and
*
for dial tone;
n for
*
9
7 = a
*
*

Advertisement

Table of Contents
loading

Table of Contents