Toshiba PERCEPTION 4000 User Manual page 43

PERCEPTION 4000
Press the CONF/TRNS key
and then dial the Call Park—
Remote access code.
3. Dial the directory number of
the line on which the call is to
be parked.
To Retrieve a Call Remotely:
1. Go off-hook to retrieve the
remotely-parked call on the
line provided by your station's
line preference type.
. . . or . . .
Press an idle line key to
retrieve the parked call on a
line other than that
automatically provided by your
station's line preference.
2. Press the CP-R key.
. . . or . . .
Enter the Call Park—Remote
access code.
3. Dial the directory number of
the line on which the call is
parked.
Listen for recall dial tone.
The dialed directory number can appear on any telephone.
Listen for success tone. The call will now be parked on the dialed line.
If the call is not retrieved within a predetermined time period, the call will
recall the prime line of the station that initiated the park.
The CP-L LED on the station whose prime line is the call park destination
will light solid green and will remain lit while the call is parked. If the line
on which the call is parked is not a prime line on any station (e.g., a
logical line), there will be no indication of the parked call on any station
containing that non-prime line appearance.
Listen for recall dial tone.
The CP-L LED on the station whose prime line was the call park
destination will go out.
NOTES:
1. If a station initiating Call Park has Call Forward registered, any
recalls of the parked call will still ring at the station.
2. If Call Park has been activated and the parked call party hangs up,
all CP-L LEDs will go out and any station user who attempts to
access the parked call will hear reorder tone.
FEATURE OPERATION
4-15