Eight Party Conference - Toshiba PERCEPTION 4000 User Manual

PERCEPTION 4000
To Set-up a Conference:
1. Establish a two-way
connection.
2. Press the CONF/TRNS key.
3. Dial the number of the third
party.
4. When the connection is
established, press the
CONF/TRNS key to form a
three-way conference.
5. To add an additional party,
press the CONF/TRNS key.
10. Once registered, Do Not Disturb will remain activated until it is
specifically canceled.
11. Do Not Disturb can be activated from any call state other than when
messages are currently being retrieved or when Program Mode is
activated. In either of these situations, the current mode must be
exited before Do Not Disturb can be activated.

EIGHT PARTY CONFERENCE

You can set up a conference of up to eight members, directly from your
telephone. The Three-way Calling feature allows you to perform a
conference of up to three members; however in order to add any
additional members to the conference, your station must have the Eight
Party Conference feature allowance. If your station does not have this
calling allowance, you can request an attendant to set up a conference.
The connected caller will be placed on "soft hold."
Listen for recall dial tone.
Listen for ringback tone.
If the party is busy or does not answer, you can return to the held party
by pressing the Release (RLS) key.
After connecting the new party to the conference, you can disconnect the
party by pressing the RLS key. You will be automatically reconnected to
the held caller.
PERCEPTION 4000 HDT2020SD digital telephones will display
conference status and will indicate the number of parties currently
involved in the conference.
The current connections will be placed on "soft hold." (See Note 1.)
Listen for recall dial tone.
FEATURE OPERATION
4-33