Toshiba PERCEPTION 4000 User Manual page 81

PERCEPTION 4000
To Swap a Connected Call and a
Waiting Call:
1. Establish a two-way
connection.
2. After hearing the Call Waiting
tone, press the SWAP access
key.
. . . or . . .
Press the CONF/TRNS key,
listen for recall dial tone, and
enter the Swap access code.
3. To alternate between the held
call and the new call,
repeatedly press the SWAP
key.
. . . or . . .
Continue to press the
CONF/TRNS key, listen for
recall dial tone, and enter the
Swap access code.
To Swap Two Calls During
Consultation Hold:
1. Establish a two-way
connection.
2. Press the CONF/TRNS key.
3. Dial the station or directory
number of the desired third
party.
4. When connected to the called
party, press the SWAP key to
automatically connect to the
held party.
5. You can alternate between
parties by repeatedly pressing
the SWAP key.
Your current call will be automatically placed on "soft hold" and you will
be connected to the new caller.
Each time the SWAP key is pressed or the Swap access code is entered,
the two calls will be switched.
The connected party will be placed on "soft hold." Listen for recall dial
tone.
If the destination is idle, you will hear ringback tone.
If the destination is busy or does not answer, see Camp-on, Camp-on
Transfer, and Call Transfer for operational alternatives.
The other party will automatically be placed on "soft hold."
Each time, the two calls will be switched.
FEATURE OPERATION
4-53