4. Remove one screw (
assembly.
Bottom Base Assembly
There are doors and tilt feet on the bottom assembly.
T
All doors snap in and out.
T
To remove the tilt feet open the foot and slightly compress the four
sections together and snap out.
Disassembly – Non-User Replaceable Drive System
Use the following procedures to disassemble the non-user replaceable hard disk
drive system.
CPU Assembly
Remove the CPU assembly as described in the following procedure.
3-20 Disassembly and Reassembly
) to release the connector board from the bottom
B
A – Screws
B – Connector CP8