NEC VERSA LX Service And Reference Manual page 78

T
1 from the VersaBay III
T
1 from the File Bay
T
3 from the battery bay
3. Turn the system over and open the LCD panel. Disassembly Sequence 1
(Battery Pack, VersaBay III Device and File Bay Device) and 2 (Keyboard)
should be completed as described in previous sections of this chapter.
4. Disconnect the VersaGlide cable from connector P11 and speaker assembly
cable from connector P10 both located on the main board.
5. Carefully separate and lift the front cover from the bottom assembly, starting
on the right and working left.
At this point in the disassembly sequence you can remove the speaker assembly,
VersaGlide assembly or LCD panel latch switch assembly, if necessary. If these
items do no need replacing, skip the next section and go to the following
sequence.
3-22 Disassembly and Reassembly
(A)
(A)
(A)
A – Bottom Screws