Led Sub Assembly; Hard Drive And Pc Card Assemblies, Cmos Battery, Buzzer, Audio Board - NEC VERSA LX Service And Reference Manual

LED Sub Assembly

The LED sub assembly consists of a board that contains three connectors and
status LEDs. The connectors are for the LCD panel switch, main board, and
microphone.
LCD Panel Switch
1. Remove two screws on the hinge bracket.
2. Disconnect the cable at connector CP13 on the LED board.
Microphone
1. Disconnect the microphone cable at connector CP11.
2. Remove the microphone and cable by gently pulling from the LCD
assembly.
LED Board and LED Board Cable
1. Remove two screws and disconnect the cable from connector CP12 on the
LED board.
2. Lift the LED board to remove.
3. Remove one screw to release the LED cable and anchor from the LCD panel
assembly.
Hard Drive and PC Card Assemblies, CMOS Battery, Buzzer,
Audio Board
The hard drive assembly, PC card assembly, CMOS battery, buzzer, audio board
may be removed and replaced individually or all must be removed to continue
the disassembly sequences.
A – Connector CP13
C – Connector CP11
B – Connector CP12
D – Microphone
Disassembly and Reassembly 3-25