Buzzer
1. Disconnect the buzzer cable from connector P29 on the main board.
2. Pry up to remove the buzzer assembly from its location.
Main Board Assembly
1. Remove the main board screws (
2. Disconnect the bridge battery cable at connector P1 (
3. Remove the one screw (
3. Disconnect the audio board (
board and disconnecting from the main board.
4. Lift the main board from the remainder of the system.
A – Main Board Screws
C – Audio Board
Fan Assembly
The fan assembly is made up of a bracket and fan. Follow the steps below to
remove.
1. Disconnect the fan cable at connector P5 on the main board.
2. Remove two screws (
3. Remove two screws to release the fan from the bracket.
CPU Assembly
The CPU assembly may also be removed from the bottom on the system, as
described in Disassembly Sequence 3 (CPU Assembly).
).
A
D
) and port cover plate.
) by gently lifting the front edge of the audio
C
B – Connector P1
D – Port Cover Plate Screw
) on the main board to release the fan assembly.
D
Disassembly and Reassembly 3-27
).
B