Time
This menu allows you to set the time as well as program a time at which the de-
vice will automatically power off or power on.
Current time
Off time
On time
Time mode
After you have finished all settings, press the MENU button (53) on the remote
control to save. Later you can make further settings, if necessary.
DLC (Dynamic
Dynamic contrast produces a greater difference between the brightest and dark-
Contrast)
est scenes. You can enable or disable this function. For movies with very dark
scenes it is recommended that you disable this feature as it would darken them
even more.
Here you must set the current time otherwise the time-control-
led features will not work properly. Press the direction buttons
or (35) to move the highlight to the hours or minutes field.
Press the or buttons (35) to adjust the desired value.
When ready, press the MENU button (53) to save the changes
and to return one menu level up.
You can set a specific time at which the device will power off
automatically. Press the direction buttons or (35) to move
the highlight to the hours or minutes field. Press the or
buttons (35) to adjust the desired value. When ready, press the
MENU button (53) to save the changes and to return one menu
level up. Then you must set the following "Time mode" option in
order for the device to power off at the set time.
You can set a specific time at which the device will power on
automatically. Press the direction buttons or (35) to move
the highlight to the hours or minutes field. Press the or
buttons (35) to adjust the desired value. When ready, press the
MENU button (53) to save the changes and to return one menu
level up. You must then set the following "Time mode" option in
order for the device to power on at the set time.
Here you set if and how often the above programmed timers
should be executed. Select "Once" if you want the device to
power on or off only once. Select "Every" if you want it to hap-
pen daily. Or select "Off" to disable the timer functions.
Signal Source "TV"
25