Skipping Channels
You can set specific channels to be skipped when switching channels by using the CH+ and CH-
buttons (38). For example, this lets you skip commercial-only channels when switching channels.
1. In the channel list, press CH+ or CH- (38) on the remote control to select the channel that you
want to skip.
2. Press the MENU button (53) on the remote control to display the setup menu.
3. Press the direction buttons or (35) on the remote control to select the "CHANNEL" menu.
Next press or (35) on the remote control to navigate to the "Skip" option.
4. Press the direction buttons or (35) on the remote control and select "On".
Press the MENU (53) or EXIT (36) button on the remote control to finish editing.
5.
From now on, when switching channels, this channel will be skipped.
Disabling the Skip function for a Channel
To make a channel marked for skipping available again for normal channel switching, proceed as
follows:
1. Press the MENU button (53) on the remote control to display the setup menu.
2. Press the direction buttons or (35) on the remote control to select the "CHANNEL" menu.
Next press or (35) on the remote control to navigate to the "Programme edit" option.
3. Press the direction buttons or (35) to show the channel list.
4. In the channel list, press or (35) on the remote control to select the channel preset that
stores the channel you want to make available again for normal channel switching.
5. Press the MENU button (53) on the remote control to return to the "CHANNEL" menu.
6. Press or (35) on the remote control to navigate to the "Skip" option.
7. Press the direction buttons or (35) on the remote control and select "Off".
The channel will be available again when switching channels by using the CH+/CH- (38) but-
tons on the remote control.
Managing Channels
31