Signal Source Ypbpr; Setup Menu For Signal Source "Ypbpr; Signal Source Pc; Supported Graphics Modes - Silvercrest LT 2310 User Manual And Service Information

Signal Source YPBPR

Setup Menu for Signal Source "YPBPR"

The setup menu lets you perform specific settings to customise the LT 2310 according to techni-
cal and personal requirements. Press the MENU button (53) to open the setup menu. The menu is
divided into five items allowing you to adjust or change picture, sound, system, function and picture-
in-picture settings.
 The options available under "Picture" are the same as for the signal source "TV". Please read
the description on page 21.
 The options available under "Sound" are the same as for the signal source "TV". Please read
the description on page 22.
 The options available under "Setup" are the same as for the signal source "TV". Please read
the description on page 23.
 The options available under "Function" are the same as for the signal source "TV": only the "9
windows" option is not available here. For a description, please read from page 24.
 The options available under "Picture-in-Picture" are the same as for the signal source "TV". For
a description, please read from page 28.

Signal Source PC

If you want to use your TV set as a PC monitor you can use a conventional VGA cable (not supplied)
to connect the port (19) to the PC's graphics adapter output. Furthermore, you can input the audio
signal coming from the PC to the terminal (8). Then the sound generated by the PC can be listened
to through the loudspeakers of your TV set.

Supported Graphics Modes

The following list contains the PC graphics modes that are supported by your LT 2310.
Resolution
640 x 480
800 x 600
1024 x 768
1280 x 1024
1920 x 1080
Never set any other resolution and vertical frequency other than those specified.
Vertical frequency (Hz)
60.00 Hz
60.00 Hz
60.00 Hz
60.00 Hz
60.00 Hz
Signal Source YPBPR
33