Troubleshooting; General Problems; Unable To Power The Tv Set On; The Remote Control Doesn't Work - Silvercrest LT 2310 User Manual And Service Information

Troubleshooting

You can solve the most common problems yourself by using the following table. If the problem per-
sists after checking the suggested solutions, please contact our Service Hotline (see page 44). Do
not attempt to repair the product yourself.

General Problems

Unable to power the TV set on.

 Connect the power cord firmly to the AC input (6) of the TV set and to a properly-functioning
power socket.
 Toggle the main power switch (5) of the TV set to On (position "I").
 Replace the batteries of the remote control.

The remote control doesn't work.

 Are there any obstacles between the remote control and the TV Set?
 Replace the batteries.
 Make sure that no direct sunlight reaches the remote control sensor (2).

No picture

 Is the connection cable to the external signal source damaged?
 Did you firmly and properly connect all required connectors to the external signal source?
 Did you select the proper signal source on the TV set?

TV Reception Problems

No picture
 Is the antenna connected properly?
 Is the antenna cable damaged?
 Did you connect the antenna cable plug firmly?
 Did you select the proper signal source on the TV set?
• Have you already executed a channel search at your present location?

Bad picture quality

 Is the antenna connected properly?
 Re-orientate the antenna. High buildings and geographical obstacles can deteriorate the signal
strength or cause ghost pictures.
 Make sure that the channel is properly tuned.
 Adjust the picture parameters such as brightness, contrast and sharpness.

No sound

 Is the sound muted? Press the MUTE button (28).
 Is the volume set to very low?

No colour

 Adjust the colour.
 Make sure that the current programme is being broadcast in colour.
 Make sure that the channel is properly tuned.
Troubleshooting
39