Managing Channels - Silvercrest LT 2310 User Manual And Service Information

Managing Channels

Managing Channels
Your LT 2310 offers multiple features for managing channels. For example, you can change the
channel order, delete channels or insert channels.
Renaming a Channel
You can name a channel with any name containing up to five characters. Proceed as follows:
1. In channel list, press  or  (35) on the remote control to select the channel preset that
stores the channel you want to rename.
2. Press the red button (45) on the remote control to select the existing name. The first character
will be highlighted.
3. Press  or  (35) on the remote control to select the desired character.
4. Press the direction buttons  or  (35) on the remote control to move the highlight to the input
field for the next character.
5. Repeat the above process until the desired name has been written.
6. Press the red button (45) on the remote control to save the name. Or press the green button
(46) to cancel and to restore the previous name.
Deleting Channels
You can remove any undesired channel from the channel list. Proceed as follows:
1. In the channel list, press  or  (35) on the remote control to select the channel that you want
to delete.
2. Press the green button (46) to mark the current channel for deletion. Next press the red button
(45) to delete it from the channel list. Or press the red button (46) to cancel.
3. Press the MENU (53) or EXIT (36) button on the remote control to finish editing.
Press the MENU button (53) to cancel the above process at any time.
Moving Channels
If a channel appears at an undesired position in the channel list, you can move it.
1. In the channel list, press  or  (35) on the remote control to select the channel preset that
stores the channel you want to move.
2. Press the blue button (44) to mark the current channel that has to be moved.
3. Press  or  (35) on the remote control to move the highlight to the channel preset where
you want to move the channel to and press the red button (45) to move it to the new position.
4. Press the MENU (53) or EXIT (36) button on the remote control to finish editing.
Press the MENU button (53) to cancel the above process at any time.
30