Panasonic KX-TAW848 Feature Manual page 215

[Programming Example of VM (DTMF) Group]
VM (DTMF)
Group No.
1
2
→ 2.9.19 [3-8-2] VM(DTMF) Group—Group Settings
[Programming Example of VM (DPT) Group]
Floating Extension No.
500
: → 2.9.16 [3-7-2] VM(DPT) Group—Unit Settings—Floating Extension No.
*1
→ [660] VM Group Floating Extension Number
: → 2.9.16 [3-7-2] VM(DPT) Group—Unit Settings—Group Name
*2
2.
Incoming Calls to VM Group
When incoming calls are received at the floating extension number of the VM group, calls will hunt
starting at the lowest VM port number. In this case, the FWD and DND settings (→ 1.4.8 DND (Do Not
Disturb), → 1.6.6 FWD (Call Forwarding)) for each extension port are disregarded.
It is programmable whether the calls queue when all extension ports in the group are busy through
system programming. If the queuing is disabled through system programming, the call will be redirected
to the destination, assigned on the trunk group which receives the call, by the Intercept Routing feature.
Conditions
• It is possible to call an extension (extension port) in a VM group directly. If the calls are routed directly
to the extension in the group, it is possible to enable some features (e.g., FWD, Idle Extension Hunting)
on the extension in the group.
The Voice Mail DTMF/DPT (Digital) Integration (e.g., command transmit) is also available on the
extension.
• One-touch Voice Mail Feature Access
It is possible to assign a One-touch Dialing button for direct access to a Voice Mail feature. (→ 1.12.2
One-touch Dialing) For example, to access a mailbox (mailbox number 123) of the VPS (extension
number 165) directly, assign "165#6123" to a One-touch Dialing button. When pressing this button, the
outgoing message (OGM) of the mailbox will be heard.
• All ports in a VM (DPT) group must be connected to either the same HLC or PLC card, or to the pre-
installed hybrid ports.
Programming References
PC Programming Manual
2.7.4 [1-1] Slot—Extension Port
→ DPT Type—Type (for Hybrid port)
→ DPT Type—VM Unit No. (for Hybrid port)
→ DPT Type—VM Port No. (for Hybrid port)
2.9.15 [3-7-1] VM(DPT) Group—System Settings
Floating
Group
Extension
Name
No.
200 Company B
300 Company C
1
Group Name
*
Company A
Extension No. of
Service
Port Connected to
Mode
1
AA 201
VM 301
2
*
1.19 V
VPS Port
2 3
202 203
302 303
Feature Manual 215