Call Park - Panasonic KX-TAW848 Feature Manual

1.3 C
1.3.5

Call Park

Description
An extension user can place a call into a common parking zone of the PBX. The Call Park feature can be
used as a transferring feature; this releases the user from the parked call to perform other operations. A
parked call can be retrieved by any extension user.
Conditions
• Automatic Call Park
It is possible to select an idle parking zone automatically.
• Retry
If the specified parking zone is occupied or there is no vacant zone for Automatic Call Park, the
originator will hear a busy tone. Retrying is possible while hearing a busy tone by selecting another
parking zone or a vacant zone.
• Call Park Recall
If a parked call is not retrieved within a preprogrammed time period, the Call Park Recall tone will be
heard at the Transfer Recall destination assigned to the extension which parked the call. If the
destination is engaged in a call, the Hold Alarm will be heard.
• If a parked CO line call is not retrieved within a preprogrammed time period (Default: 30 minutes), it is
automatically disconnected.
• Call Park Button
Pressing the Call Park button parks or retrieves a call in a preset parking zone.
Any flexible button can be customized as the Call Park button. It shows the current status of the preset
parking zone as follows:
Light pattern
Slow red flashing
Off
• Call Park (Automatic Park Zone) Button
Pressing the Call Park (Automatic Park Zone) button parks a call in an idle parking zone automatically.
Any flexible button can be customized as the Call Park (Automatic Park Zone) button.
• Call Park Retrieve Deny
Internal Call Block (→ 1.9.12 Internal Call Block) also determines which extensions' calls an extension
user can retrieve from a parking zone, i.e., if extension 101 cannot call extension 201, then it cannot
retrieve extension 201's parked calls either.
Programming References
PC Programming Manual
2.8.4 [2-3] Timers & Counters
→ Recall—Call Park Recall
→ Recall—Disconnect after Recall
2.8.8 [2-6-1] Numbering Plan—Main—Features—Call Park / Call Park Retrieve
2.10.4 [4-1-4] Wired Extension—Flexible Button
→ Type
→ Parameter Selection (for Call Park)
36 Feature Manual
A call is parked in the preset parking zone
There are no parked calls
Status