Incoming Call Features - Panasonic KX-TAW848 Feature Manual

1.9 I
• FWD/DND Mode
While searching for an idle extension within an idle extension hunting group, any extension that has set
FWD—All Calls or DND feature will be skipped, and the call will go to the next extension in the group.
Programming References
PC Programming Manual
2.9.13 [3-6] Extension Hunting Group
2.9.14 [3-6] Extension Hunting Group—Member List
PT Programming Manual
[680] Idle Extension Hunting Type
[681] Idle Extension Hunting Group Member
Feature Manual References
1.4.8 DND (Do Not Disturb)
1.6.6 FWD (Call Forwarding)
2.1 Capacity of System Resources
1.9.8

INCOMING CALL FEATURES

Description
CO lines are used to connect a PBX to a public network, i.e., the telephone company.
1.
Distribution Method
Each CO line port can use a different method of directing calls to their destinations as they are received.
Distribution Method
Direct In Line (DIL)
Calling Line Identification
(CLI) Distribution
Calling Line Identification (CLI) distribution is the more customizable call distribution method. It allows
calls from specific people to be directed to specific destinations, based on the callers' telephone
numbers. CLI distribution, when enabled for the current time mode, takes precedence over DIL
distribution.
2.
Available Destination
The following destination types can be programmed as DIL or CLI destinations.
Wired Extension (PT/SLT)
126 Feature Manual
Description
Directs a call to a preprogrammed destination, such
as an operator, based on the CO line carrying the
call.
Directs a call to its preprogrammed destination if the
caller's telephone number and its CLI destination
have been stored in the System Speed Dialing Table.
Destination Type
Details in
• 1.4.5 DIL (Direct
In Line)
• 1.3.10 CLI
(Calling Line
Identification)
Distribution
Availability