Site Survey - Panasonic KX-UDS124 Installation Manual

4.3 Site Survey

Prepare the following items for the site survey.
AC Adaptor
User-supplied items
Power
Source
PoE Hub
PoE Adaptor
SIP-CS
S-PS
Site map
Pencil
*1 Please refer to "4.5 Example of How to Make a Site Map", and write down the MAC address of each CS and radio signal values on
the map.
LED Indications for Site Survey Mode
SIP-CS State
Site Survey Mode
Item
•
Red and green alternate flashing: Site Survey Master mode
•
Slow green flashing: The site survey signal being received is good
•
Slow amber flashing: The site survey signal being received is not good
•
Slow red flashing: The site survey signal has been lost
•
Moderate red flashing: No site survey signal (before receiving IP address)
Note
LED flashing patterns are as follows:
•
Slow Flashing: 60 times per minute
•
Moderate Flashing: 120 times per minute
Qty
KX-A239
Battery 9–12 V
Battery cable: PSJS02P57
One of either
IEEE802.3af certified
IEEE802.3af certified
2 KX-UDS124
1 KX-UDT111, KX-UDT121,
KX-UDT131
1 Map of site or floor.
1 To write the MAC addresses and
radio signal values on the site map.
Description
4 Deployment Procedure
Description
Installation Guide
*1
31