Panasonic KX-UDS124 Installation Manual page 5

•
The SIP-CS should not be placed near high-voltage equipment.
•
The SIP-CS should not be placed on a metal object.
•
The SIP-CS should be kept free of dust, moisture, high temperature (more than 40 °C), low temperature
(less than 0 °C), and vibration, and should not be exposed to direct sunlight.
•
When driving the screws into the wall, be careful to avoid touching any metal laths, wire laths or metal
plates in the wall.
•
Use cables that are fire-resistant or fireproof.
•
Make sure the cables are securely fastened to the wall.
•
The AC adaptor is used as the main disconnect device. Ensure that the AC adaptor is located near the
SIP-CS and is easily accessible.
•
Disconnect the AC adaptor cord and all cables from the SIP-CS before cleaning. Clean the SIP-CS with a
soft, dry cloth. Do not use liquid, aerosol cleaners, abrasive powders, or chemical agents to clean the
SIP-CS.
•
When left unused for a long period of time, disconnect the SIP-CS from the AC outlet. When the SIP-CS
receives power from a PoE power supply, disconnect the LAN cable.
•
Medical—consult the manufacturer of any personal medical devices, such as pacemakers, to determine
if they are adequately shielded from external RF (radio frequency) energy. (The SIP-CS operates in the
frequency range of 1880 MHz to 1900 MHz, and the output peak power level is less than 0.25 W.) Do not
use the SIP-CS in health care facilities if any regulations posted in the area instruct you not to do so.
Hospitals or health care facilities may be using equipment that could be sensitive to external RF (radio
frequency) energy.
•
To ensure the security of private conversations, only connect the SIP-CS to a secure network.
•
To prevent unauthorised access, only connect the SIP-CS to a network that is properly managed.
•
Make sure all personal computers that are connected to the SIP-CS employ up-to-date security measures.
•
To avoid unauthorised access and possible abuse of your phone system, we strongly recommend:
–
Keeping the password secret.
–
Changing your password regularly.
–
Selecting a complex, random password that cannot be easily guessed.
•
Maintain the distances listed in "Required Distances between Equipment" between equipment in order to
prevent noise, interference or the disconnection of a conversation. (The distance may vary depending on
the environment.)
Notice
SAFETY REQUIREMENTS
•
Before connecting the SIP-CS, confirm that the SIP-CS supports the intended operating environment.
•
If the SIP-CS does not operate properly, disconnect the AC adaptor cord and LAN cable, then connect
again.
•
The SIP-CS may not operate in the event of a power failure.
•
Do not move the SIP-CS while it is in use.
•
Satisfactory operation, interoperability, and compatibility cannot be guaranteed with all equipment
connected to the SIP-CS, nor with all services provided by telecommunications providers over networks
connected to the SIP-CS.
SECURITY REQUIREMENTS
•
Privacy of communications may not be ensured when using the wireless systems.
•
Keep a copy of all important data (such as your network information) before sending the machine for
repair.
1 For Your Safety
Installation Guide 5