Turning The Power On - Brother SV-100B User Manual

Turning the Power On

Turning the Power On

1
Press
The process takes about 5 seconds from when the power is off until it turns on. Note
that if
startup time can be shortened. Refer to "Configuring Quick Startup" on page 64.
The battery must be charged before using the unit. Refer to "Charging" on page 78.
The status lamp (center green) flashes and the [Top folder] screen displays.
2
• If the setting in "Configuring Quick Startup" on page 64 is changed to [Show last
page when powered off], the content page displayed immediately before the power
was turned off displays.
• If the setting in "Configuring Quick Startup" on page 64 is changed to [Show last
page when powered off], the [Security folder password] screen displays when the
power is turned off while browsing the contents within the security folder.
• If the setting in "Configuring the confirmation screen during USB connection"
on page 68 is changed to [Display], the [USB charge options] screen displays when
the USB cable is connected. Refer to "USB connection/charging" on page 80
regarding operations while the USB cable is connected.
• If the power is turned off while displaying a white screen when the battery is empty
or high temperatures are detected, a popup warning message displays for several
seconds when the power is turned on.
• The following increases the speed of startup.
• When "Configuring Quick Startup" on page 64 is set to [Quick Startup] and the
power is turned on by pressing
• When the power is turned on after turning the power off while the AC adapter or
USB cable is connected to the unit.
27
.
is pressed again during this process, the power may not turn on. The
.