Configuring The Time And Date - Brother SV-100B User Manual

Configuring the time and date

Set the date between 1/1/2009 and 12/31/2099.
When the power is turned on for the first time after purchase, the time and date start from 1/1/
2009 00:00:00 (Default).
The time stops and returns to default settings when the battery runs out or when the battery is removed.
• The accessed date displayed in the SV-Manager displays the time set here. Note
that when the time returns to default settings or is changed, the time may
differ from the actual time.
• The displayed order of this unit's access history is unaffected by changes in
date and time. The files are displayed in order according to the actual
accessed date.
Configuration Method
1
Display the [Change settings] screen.
• Refer to "Displaying the [Change settings] screen" on page 60 to display the [Change
settings] screen.
2
Select [Time and date].
3
Use the numeric keys and enter the numbers in the order of year, month, date, hour,
and minute.
• The cursor moves as the numbers are entered.
• To make corrections, select [Next], or press
appropriate place, and make your corrections.
• If an invalid number is entered, the status light (orange) flashes.
or to move the cursor to the
5
72