Brother SV-100B User Manual page 56

3
Place the document to be scanned on the multi-function device, and start scanning.
The status lamp (center green) flashes, and data is transferred from the multi-function
device to the unit.
• For details, see "Scan to USB (Media)" section in the documentation for the multi-function
device.
• Once scanning starts, a folder named "BROTHER" is created in the root directory of the
unit's memory card. The scanned data is stored in this folder.
Once the document transfer is complete, the status lamp (center green) changes to an
illuminated state.
• The only graphic format supported by the Scan-to-SV-100B function are PDF,
JPEG and TIFF from a Brother multi-function device. Conversion to the unit's
proprietary file is not guaranteed if you manually save the graphic data (PDF, JPEG,
TIFF) via a PC or a non-Brother multi-function device.
• If the graphic format is set to PDF and TIFF on the multi-function device, multiple
pages are converted to one proprietary file.
If the graphic format is set to JPEG on the multi-function device, each page is
converted to one proprietary file.
• With Scan-to-SV-100B function, the optimal scan setting for the multi-function
device is 150 to 200 dpi in color.
4
Once scanning is complete, disconnect the USB cable from the unit.
The [Transfer document] screen is displayed, and the scanned data is converted to the
unit's proprietary file.
• To abort document transfer, select [Cancel]
Using Scan-to-SV-100B Function
4
56