Lan Monitoring - Siemens A31003-D3000-M100-01-76A9 Administrator User Manual

3.23.5 LAN Monitoring

A31003-D3000-M100-01-76A9, 02-2013
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
The diagnostic call can only be determined during the call so initial traces might
get lost. For this reason, user may need to do additional call. This is completely
user related and user should be informed about the process. There will not be any
restriction to prevent user to dial the prefix. If the prefix is configured by admin,
user can always dial the prefix and start a diagnostic call. The prefix has to consist
of the leading asterisk followed by three digits and the hash. Example: *333#.
Administration via WBM
Maintenance > Diagnostic Call
Administration via Local Phone
|
--- Admin
|--- Maintenance
|--- Diagnostic Call
Admin will not be able to change trace settings or can not clear the existing phone
traces during an active diagnostic tracing. If admin tries to change trace configu-
ration or delete existing traces this will not be allowed and admin will get the
following error: Change not allowed: Diagnostic tracing is active!
Related Topics
The LAN port mirror facility allows for monitoring all network traffic at the phone's
LAN port.
Additionally, there is a possibility to monitor LAN traffic and port settings in the
Local user menu:
|
--- User
|--- Network information
|--- IP address
|--- WBM URL
|--- DNS domain
|--- LAN RX
|--- LAN TX
|--- PC RX
|--- PC TX
|--- LAN autonegotiated
Administration
Diagnostics
197