Automatic Vlan Discovery Using Dhcp - Siemens A31003-D3000-M100-01-76A9 Administrator User Manual

3.2.2.2 Automatic VLAN discovery using DHCP

A31003-D3000-M100-01-76A9, 02-2013
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
To enable VLAN discovery via LLDP-MED, activate the LLDP-MED Enabled-
checkbox and select LLDP-MED in the VLAN discovery option. Afterwards, click
Submit.
Administration via Local Phone
To enable VLAN discovery via LLDP-MED, set the Use LLDP-MED option to Yes
and select LLDP-MED in the VLAN discovery option.
|
--- Admin
|--- Network
|--- General IP configuration
|--- Protocol mode
|--- Use LLDP-MED
|--- Use DHCP
|--- Use DHCPv6
|--- VLAN discovery
|--- VLAN ID
Related Topics
To automatically discover a VLAN ID using DHCP, the phone must be configured
as DHCP enabled, and VLAN discovery mode must be set to "DHCP". LLDP-
MED should be disabled. The DHCP server must be configured to supply the
Vendor Unique Option in the correct VLAN over DHCP format. If a phone
configured for VLAN discovery by DHCP fails to discover its VLAN, it will proceed
to configure itself from the DHCP within the non-tagged LAN. Under these circum-
stances, network routing may probably not be correct.
Administration via WBM
Network > General IP configuration
Administration
LAN Settings
45