Snmp - Siemens A31003-D3000-M100-01-76A9 Administrator User Manual

3.3.9 SNMP

A31003-D3000-M100-01-76A9, 02-2013
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
Administration via Local Phone
|
--- Admin
|--- Network
|--- Update Service (DLS)
|--- DLS address
|--- DLS port
|--- Contact gap
|--- Security status
|--- Security PIN
Related Topics
The Simple Network Management Protocol is used by network management
systems for monitoring network-attached devices for conditions that warrant
administrative attention. An SNMP manager surveys and, if needed, configures
several SNMP elements, e.g. VoIP phones.
OpenScape Desk Phones support SNMPv1.
There are currently 4 trap categories that can be sent by the phones:
Standard SNMP Traps
OpenScape Desk Phones support the following types of standard SNMP traps,
as defined in RFC 1157:
• coldStart: sent if the phone does a full restart.
• warmStart: sent if only the phone software is restarted.
• linkUp: sent when IP connectivity is restored.
QoS Related Traps
These traps are designed specifically for receipt and interpretation by the
Customer Data Collection system (OpenScape Customer Data Collection (CDC)
or HiPath QoS Data Collection). The traps are common to SIP phones, HFA
phones, Gateways, etc.
Traps for important high level SIP related problems
Currently, these traps are related to problems in registering with a SIP Server and
to a failure in remotely logging off a mobile user. These traps are aimed at a non-
expert user (e.g. a standard Network Management System) to highlight important
telephony related problems.
Traps specific to OpenScape Desk Phones
Currently, the following traps are defined:
TraceEventFatal: sent if severe trace events occur; aimed at expert users.
Administration
IP Network Parameters
65