Use Dhcp - Siemens A31003-D3000-M100-01-76A9 Administrator User Manual

Administration
IP Network Parameters

3.3.3 Use DHCP

52
Set the Protocol Mode to IPv4 or IPv6 or both (the default setting is IPv4_IPv6).
Afterwards, click Submit.
Administration via Local Phone
|
--- Admin
|--- Network
|--- General IP Configuration
|--- Protocol Mode
Related Topics
If this parameter is set to "Yes" (default), the phone will search for a DHCP server
on startup and try to obtain IP data and further configuration parameters from that
central server.
If no DHCP server is available in the IP network, please deactivate this option. In
this case, the IP address, subnet mask and default gateway/route must be
defined manually.
INFO: The phone is able to maintain its IP connection even in
case of DHCP server failure. For further information, please refer
to DHCP Resilience.
The following parameters can be obtained by DHCP:
Basic Configuration
• IP Address
• Subnet Mask
Optional Configuration
• Default Route (Routers option 3)
• IP Routing/Route 1 & 2 (Static Routes option 33, Classless static route option
121, Private/Classless Static Route (Microsoft) option 249)
• SNTP IP Address (NTP Server option 42)
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
A31003-D3000-M100-01-76A9, 02-2013