Manual Configuration Of A Vlan Id - Siemens A31003-D3000-M100-01-76A9 Administrator User Manual

Administration
LAN Settings

3.2.2.3 Manual Configuration of a VLAN ID

46
To enable VLAN discovery via DHCP, activate the DHCPv6 Enabled checkbox
and select DHCP in the VLAN discovery option. Afterwards, click Submit.
Administration via Local Phone
To enable VLAN discovery via DHCP, activate the DHCPv6 Enabled checkbox
and select DHCP in the VLAN discovery option.
|
--- Admin
|--- Network
|--- General IP configuration
|--- Protocol mode
|--- Use LLDP-MED
|--- Use DHCP
|--- Use DHCPv6
|--- VLAN discovery
|--- VLAN ID
Related Topics
To configure layer 2 VLAN manually, make sure that VLAN discovery is set to
Manual and LLDP-MED is disabled. Then, the phone must be provided with a
VLAN ID between 1 and 4095. If you mis-configure a phone to an incorrect VLAN,
the phone will possibly not connect to the network. In DHCP mode it will behave
as though the DHCP server cannot be found, in fixed IP mode no server connec-
tions will be possible.
Administration via WBM
Network > General IP configuration
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
A31003-D3000-M100-01-76A9, 02-2013