Date And Time - Siemens A31003-D3000-M100-01-76A9 Administrator User Manual

Administration
System Settings

3.5.4 Date and Time

82
• distinguish logged calls based on the device on which the calls were
completed, and
• decide whether missed calls that were answered elsewhere shall be
– included in the call log, OR
– excluded from the call log, i.e. not logged at all.
In the Call Lists, missed calls that were completed elsewhere are marked with a
check mark. For details, please refer to the User manual.
Administration via WBM (User menu)
User > Configuration > Call logging
Administration via Local Phone (User menu)
|
--- User
|--- Configuration
|--- Missed
|--- Include answered elsewhere
|--- Exclude answered elsewhere
Include answered elsewhere: Calls completed elsewhere will be logged as
missed calls. In the call log these calls are marked with a check mark.
Exclude answered elsewhere: Calls completed elsewhere will not be visible on
phone; they will not be logged at all.
Related Topics
If the DHCP server in your network provides the IP address of the SNTP server,
no manual configuration is necessary. If not, you have to set the SNTP IP
address parameter manually.
For correct display of the current time, the Timezone offset must be set appro-
priately. This is the time difference between the local time and UTC (Universal
Time Coordinated). If, for instance, the phone is located in Munich, Germany, the
offset is +1 (or simply 1); if it is located in Los Angeles, USA, the offset is -8. For
countries or areas with half-our time zones, like South Australia or India, non-
integer values can be used, for example 10.5 for South Australia (UTC +10:30).
If the phone is located in a country with DST (Daylight Saving Time), you can
choose whether DST is toggled manually or automatically. For manual toggling,
disable Auto time change and enable or disable Daylight saving; the change
will be in effect immediately. For automatic toggling, enable Auto time change;
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
A31003-D3000-M100-01-76A9, 02-2013