Extended Network Configuration; Vendor Specific: Vlan Discovery And Dls Address - Siemens A31003-D3000-M100-01-76A9 Administrator User Manual

2.3.7 Extended Network Configuration

2.3.8 Vendor Specific: VLAN Discovery and DLS Address

A31003-D3000-M100-01-76A9, 02-2013
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
To have constant access to other subnets, you can enter a total of two more
network destinations. For each further domain/subnet you wish to use, first the IP
address for the destination, and then that of the router must be given. The option's
name and code are as follows:
• option #33 "Static Routing Table"
For manual configuration of specific/static routing see Specific IP Routing.
• Also the DNS domain wherein the phone is located can be specified by
DHCP. The option's name and code are as follows:
option #15 "Domain Name"
For manual configuration of the DNS domain name see DNS Domain Name.
Related Topics
INFO: The VLAN ID can also be configured by LLDP-MED (see
Automatic VLAN discovery using LLDP-MED).
If the phone is to be located in a VLAN (Virtual LAN), a VLAN ID must be
assigned. In case the VLAN shall be provided by DHCP, VLAN Discovery must
be set to "DHCP" (see Automatic VLAN discovery using DHCP).
If a DLS (Deployment Service) server is in use, its IP address must be provided.
It is recommended to configure the DLS server address by DCHP, as this method
enables full Plug & Play: having received the DLS address from DHCP, the phone
will contact the DLS during start-up. Provided that the DLS is configured appro-
priately, it will send all necessary configuration data to the phone. Additionally, this
method is relevant to security, as it ensures the authenticity of the DLS server.
For manual configuration of the DLS server address see Configuration & Update
Service (DLS).
For the configuration of vendor-specific settings by DHCP, there are two alter-
native methods:
• the use of a vendor class - see How to Use a Vendor Class,
or
• the use of DHCP option 43 - see How to Use Option #43 "Vendor Specific".
Related Topics
Startup
Quick Start
21