Panasonic DBS576 Section 700 Technical Manual page 105

Section 700 - Operation
5. Press the HOLD key.
6. Press the HOLD key.
7. Enter the start date by month (two characters) and day (two
characters) for Exception Period 1.
Note: To clear an entry or existing data, press the FLASH
key.
8. Press the HOLD key.
9. Enter the stop date by month (two characters) and day (two
characters) for Exception Period 1.
Note: To clear an entry or existing data, press the FLASH
key.
10. Press the HOLD key.
11. To set additional Exception Day modes, press the volume
up or down key or press the HOLD key to move to the
desired mode.
12. Repeat steps 7-11 until all Exception Day modes are set.
(Up to 6 exception periods may be specified.)
Note: The entry positions are listed in Table 12 on page
106.
13. Press the AUTO key to exit the entry mode.
14. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
576-20-700
Action
DBS 576 (USA), issued January 1999
Chapter 4. User Maintenance
Result
2-
Mode Except Day displays
200 :MMDD
PTN 1 Start Day displays
201 :MMDD
PTN 1 Stop Day displays
Next Exception Day mode displays
Desired Exception Day mode displays
2-
Mode Except Day displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
105